Table of Contents
Advertisement
Figure 6-12: Removing the Dummy Drive Tray
Drive Tray
5. Secure the hard drive to the tray using four screws (Figure 6-13).
6. Insert the hard drive into the chassis. To do this:
a. Press the hard drive release button to extend the drive tray handle.
b. Insert the hard drive into the chassis and close the handle to lock the hard
drive into place.
Figure 6-13: Installing the Hard Drive
6-11
Chapter 6: Advanced Chassis Setup
SAS/SATA or SCSI
Hard Drive
Advertisement
Table of Contents
