Supermicro SUPERSERVER 8048B-TR3 User Manual page 26

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual
Installing the Outer Rails to the Rack (Figure 2-5)
1. Attach the front and rear short brackets to the outside of the long bracket.
Both bracket ends must face the same direction.
2. Adjust both the brackets to the proper distance so that the rail fi ts snugly into
the rack.
3. Secure the front side of the outer rail with two M5 screws and the rear side of
the outer rail with three M5 screws. NOTE: The outer rail is adjustable from
approximately 26" to 38.25".
4. Repeat steps 1-3 for the left outer rail.
Figure 2-5: Assembling the Outer Rails
Secure to the Front of
the Rack
2-8
Secure to the Rear of
the Rack
Attach to Rear Bracket