Table of Contents
Advertisement
SUPERSERVER 8048B-TR3F/C0R3FT User's Manual
QPI Per Socket Confi guration
CPU 0/CPU 1
IO Resource Allocation Ratio
Use this feature to set the IO resource-allocation ratio (from 0-8). The default
setting is 1.
MMIOL Resource Allocation Ratio
Use this feature to set the Memory-Mapped IO resource-allocation ratio (from
0-8). The default setting is 1.
IIO UniPhy Disable
Select Yes to hide the entire UNIFY in the L2 cache. The options are No, Yes,
and Yes w/Memory Hot Add.
Memory Confi guration
This section displays the following Integrated Memory Controller (IMC)
information.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what is specifi ed in the specifi cation. The options are Auto, 1067, 1333,
1600, 1867, and 2133.
ODT (On-Die Termination) Timing Mode
Use this feature to configure the timing mode setting for the ODT (On-
Die Termination) where the termination resistor for impedance matching in
transmission lines is located inside a chip instead of on a printed circuit board.
The options are Aggressive Timing and Conservative Timing.
MxB Rank Sharing Mapping
Use this feature to select the address-mapping setting for memory-rank sharing
to enhance extended multimedia platform performance. The options are
Maximum Performance and Maximum Margin.
7-14
Advertisement
Table of Contents
