Table of Contents
Advertisement
2-6
Tower Confi guration Instructions
The SC748 tower/4U rackmount chassis is shipped with the chassis cover and
feet pre-installed. To use the chassis as a desktop server, no other installation is
required.
Use the instructions in this section if you have converted the chassis for rack use
and need to return the chassis to tower mounting.
Installing the Chassis Cover
1. Remove the rack mount ears.
Figure 2-8: Adding the Chassis Feet and Top Cover
Add the Chassis
Cover
2. Align the cover post with the corresponding holes on the top of the chassis
and place the cover on top of the chassis. The cover should overhang
Chapter 2: Server Installation
2-11
Remove Chassis
Rack Mount
Ears
Add the
Chassis
Feet
Advertisement
Table of Contents
