Supermicro SUPERSERVER 8048B-TR3 User Manual page 74

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual
Connector
BT2 (Battery)
COM1/COM2
FAN1-FAN10
I-SATA0-5
JD1
JF1
JIPMB1
JL1
JPI C1
2
JPSAS1 (for X10QBL-CT)
JPWR1
JPWR2/3/4/5
LAN1/2 (for X10QBL)
LAN1/2 (for X10QBL-CT))
IPMI_LAN
L-SAS0-3, L-SAS4-7
(for X10QBL-CT))
JSD1/JSD2
JSTBY1
JTPM1
(CPU1) Slot1
(CPU2) Slot2/4
(CPU2) Slot3
SP1
T-SGPIO1/2
(BP)USB0/1
(BP)USB2
USB4/5
USB6/7
USB8
UID
VGA
Description
Onboard CMOS Battery (See Chpt. 3 for used battery disposal.)
Back panel COM port 1/Serial port 2 header
CPU/System fan headers
Intel SATA 3.0/2.0 ports 0-5 (I-SATA 3.0 ports 0/1, I-SATA 2.0 ports 2-5)
(supported by Intel PCH)
Speaker/Power LED header
Front Panel Control header
4-pin external BMC I C header (for IPMI-card support)
2
Chassis intrusion header
Power System Management Bus (SMB) header
2-pin power connector for SAS HDD status support
24-pin power connection header
8-pin power connectors
Gigabit Ethernet LAN ports 1/2 (supported by Intel i350 LAN controller)
10G-LAN (TLAN) ports 1/2 (supported by Intel X540 LAN controller)
Gigabit IPMI-dedicated LAN on the I/O back panel (supported by the BMC for
IPMI use)
SAS ports 0-3, 4-7 (supported by LSI 3008 SAS controller)
SATA DOM (Device-On-Module) power connectors 1/2
Standby power connection header
TPM (Trusted Platform Module)/Port 80 header
PCI-Exp. 3.0x16 slot (supported by CPU1)
PCI-Exp. 3.0x8 slots (supported by CPU2)
PCI-Exp. 3.0x16 slot (supported by CPU2)
Internal speaker/buzzer
Serial_Link General-purpose I/O connectors 1/2 for I-SATA 0-5 support
Rear USB 2.0 ports 0/1 on the I/O back panel
Rear USB 2.0 port 2 on the I/O back panel
USB 2.0 connections 4/5 header for front access
USB 2.0 connections 6/7 header for front access
Type A USB 2.0 header 8
Unit-Identifi cation (UID) button
Back panel VGA port
5-18