Table of Contents
Advertisement
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support which will provide complete
USB keyboard legacy support for the operating system that does not support Legacy
USB devices. The options are Disabled and Enabled.
USB Controller 0 Enable
Select Enabled to enable USB Controller 0 which supports USB Port 0 to Port 7.
The options are Disabled and Enabled.
USB Controller 1 Enable
Select Enabled to enable USB Controller 1 which supports USB Port 8 to Port 13.
The options are Disabled and Enabled.
SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA devices that are supported by the Intel PCH chip and displays the
following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH chip. The options are Enabled and Disabled.
Confi gure SATA as
Select IDE to confi gure a SATA drive specifi ed by the user as an IDE drive. Select
AHCI to confi gure a SATA drive specifi ed by the user as an AHCI drive. Select
RAID to confi gure a SATA drive specifi ed by the user as a RAID drive. The options
are IDE, AHCI, and RAID.
*If the item above "Confi gure SATA as" is set to AHCI, the following items
will display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link in a low power mode during
extended periods of I/O inactivity, and will return the link to an active state when
I/O activity resumes. The options are Enabled and Disabled.
7-19
Chapter 7: BIOS
Advertisement
Table of Contents
