Supermicro SUPERSERVER 8048B-TR3 User Manual page 144

SUPERSERVER 8048B-TR3F/C0R3FT User's Manual

BMC Network Confi guration
The following items will be displayed:
•
IPMI LAN Selection
•
IPMI Network Link Status
Update IPMI LAN Confi guration
Select Yes for the system BIOS to automatically reset the following IPMI settings
at next system boot. The options are Yes and No.
Confi guration Address Source (Available when the item above - Update
IPMI LAN Confi guration is set to Yes)
Use this item to select the IP address source for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system
manually in the fi eld. If DHCP is selected, AMI BIOS will search for a DHCP
(Dynamic Host Confi guration Protocol) server attached to the network and request
the next available IP address for this computer. The options are DHCP Unspecifi ed,
and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number is separated by dots and it should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
When you have completed the system confi guration changes, select this option to
save the changes and reboot the computer so that the new system confi guration
settings can take effect. Select Save Changes and Exit, and press <Enter>. When
the dialog box appears, asking you if you want to exit the BIOS setup without
saving, click Yes to quit BIOS without saving the changes, or click No to quit the
BIOS and save changes.
7-34