Vacon NX User Manual page 125

CONTROL KEYPAD
Parameter sets
Select
Parameter sets
Wait...
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
To keypad
Enter the page (S6.3.2) from the
enter the edit mode. Use the
Enter button
. Wait until 'OK' appears on the display.
READY
Copy Parameters
P1 P4
READY
Up to keypad
Wait...
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
From keypad
Enter the
to enter the edit mode. Use the
Application parameters
The procedure to download the parameters from keypad to drive is similar to that of from drive to
keypad. See above.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
Figure 70. Storing and loading of parameter sets
Parameter copy menu
Browser buttons
to select the option
READY
Up to keypad
Select
READY
Up to keypad
OK
Figure 71. Parameter copy to keypad
Parameter copy menu
page (S6.3.3) from the
Browser buttons
Enter button
and press the
READY
enter
READY
. Push the
All parameters
READY
Up to keypad
All param.
. Push the
to select either the option
. Wait until 'OK' appears on the display.
vacon • 123
CONFIRM
CANCEL
11384_uk
Menu button right
to
and press the
CONFIRM
enter
CHANGE VALUE
CANCEL
11385_uk
Menu button right
All parameters or
7