Vacon NX User Manual page 124

vacon • 122
System Menu
Application
Standard
7.3.6.3 Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another or to store parameter sets in the internal memory of the converter. All
the parameter groups are first
drive and then the parameter groups are
Before any parameters can successfully be copied from one drive to another the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The Vacon NX frequency converter features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in
the application).
Parameter sets
On
LoadFactDef
begins to blink and you can confirm the loading of factory defaults by pushing the
Enter button
. The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the
Confirm with the
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
7
STOP READY
I/Oterm
S1 S11
STOP READY
I/Oterm
Figure 69. Change of application
uploaded
page (S6.3.1), push the
Enter button
. Wait until 'OK' appears on the display.
STOP
I/Oterm
Application
Standard
STOP
I/O term
Application
enter
Multi-step
to the keypad, then the keypad is connected to another
downloaded
to it (or possibly back to the same drive).
Menu button right
to enter the
CONTROL KEYPAD
READY
READY
11383_uk
Edit menu
. The text
Browser buttons
.