Vacon NX User Manual page 102

vacon • 100
Figure 56. Connecting the power supply and control cables to the control unit, Ch6x
Figure 57. Connecting the power supply and control cables to the control unit, Ch7x
Each fibre optic cable has a number 1...7 marked on the cable shield at both cable ends. Connect
each cable to the connectors marked with the same number 1...7 on the ASIC board and on the rear
side of the control unit.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
6
X10
Min bending radius 50 mm
X10
Min bending radius 50 mm
ELECTRICAL CABLING AND CONNECTIONS
1
2
3
4
5
6
7
1
2
3
4
5
6
7
11310_uk
11297_uk