Remote Programming With Mct-10 - Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual

About Frequency Converter P...

5.6 Remote Programming with MCT-10

Danfoss has a software program available for developing,
storing, and transferring frequency converter
programming. The MCT-10 allows the user to connect a PC
to the frequency converter and perform live programming
rather than using the LCP. Also, all frequency converter
programming can be done off-line and simply downloaded
into frequency converter. Or the entire frequency converter
profile can be loaded onto the PC for back up storage or
analysis.
The USB connector or RS-485 terminal are available for
connecting to the frequency converter.
MCT-10 is available for free download at www.VLT-
software.com. A CD is also available by requesting part
number 130B1000. A user's manual provides detailed
operation instructions.
®
VLT AQUA Drive
Operating Instructions
®
MG.20.M8.02 - VLT is a registered Danfoss trademark
5 5
45