Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual page 59

Warnings and Alarms
No. Description
251 New type code
Table 8.2 Warning/Alarm Action List
(X) Dependent on parameter
1)
Can not be Auto reset via 14-20 Reset Mode
A trip is the action when an alarm has appeared. The trip will coast the motor and can be reset by pressing the reset
button or make a reset by a digital input (parameter group 5-1* [1]). The origin event that caused an alarm cannot damage
the frequency converter or connected parts. A Trip Lock situation can only be reset by a power cycling.
8 8
56
®
VLT AQUA Drive
Operating Instructions
Warning Alarm/Trip
®
MG.20.M8.02 - VLT is a registered Danfoss trademark
Alarm/Trip Lock
X X
Parameter Reference