Syslog/Mail Alert - Draytek Vigor2912 User Manual

4 . 1 5 . 7 S y s l o g / M a
4 . 1 5 . 7 S y s l o g / M a
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web user interface of the router or borrow debug equipments.
Available settings are explained as follows:
Item
SysLog Access Setup
AlertLog Setup
i l A l e r t
i l A l e r t
Description
Enable - Check Enable to activate function of syslog.
Syslog Save to – Check Syslog Server to save the log to
Syslog server.
USB Disk - Check USB Disk to save the log to the attached
USB storage disk.
Router Name - Display the name for such router
configured in System Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router
name.
Server IP Address -The IP address of the Syslog server.
Destination Port - Assign a port for the Syslog protocol.
Mail Syslog – Check the box to recode the mail event on
Syslog.
Enable syslog message - Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, Call, WAN, Router/DSL information to
Syslog.
Check Enable to activate function of alert log.
365
Vigor2912 Series User's Guide