Draytek Vigor2912 User Manual page 123

IPv6
Advanced
4 . 1 . 3 . 1 D e t a i l s P a g
4 . 1 . 3 . 1 D e t a i l s P a g
To use PPPoE as the accessing protocol of the internet, please click the PPPoE tab. The
following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN
interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
This button allows you to configure DHCP client options.
e f o r P P P o E i n W A
e f o r P P P o E i n W A
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Service Name (Optional) - Enter the description of the
specific network service.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this
field.
The maximum length of the password you can set is 62
113
N 1 / W A N 2
N 1 / W A N 2
Vigor2912 Series User's Guide