Draytek Vigor2912 User Manual page 138

4 . 1 . 3 . 8
4 . 1 . 3 . 8
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account ) before you try to use TSPC for network
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6 prefix
from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Available settings are explained as follows:
Item
Username
Password
Tunnel Broker
Vigor2912 Series User's Guide
D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
v 6 – T S P C i n W A
v 6 – T S P C i n W A
Description
Type the name obtained from the broker. It is suggested for
you to apply another username and password for
http://gogonet.gogo6.com/page/freenet6-account.
The maximum length of the name you can set is 63
characters.
Type the password assigned with the user name.
The maximum length of the name you can set is 19
characters.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
128
N 1 / W A N 2 / W A N 3
N 1 / W A N 2 / W A N 3