Draytek Vigor2912 User Manual page 186

4. Click any Index number link (e.g., 1 in this case). Configure the settings as follows.
Now, if you want such route policy will be applied by Vigor router with higher priority,
please adjust the value of Priority for such route policy. In general, default route is
specified with the lowest priority for it value is fixed as "250". And Routes in Routing
Table are fixed as "150". You can adjust the value for such route policy with lower value,
e.g., 100 to ensure it will be applied to packets transmission with the highest priority.
5. After finished the above settings, click OK to save the configuration.
6. To route the packets coming from the Firewall Router back to the remote router, access
into the web user interface of the Firewall Router. Then, set "192.168.1.1/24" as the
gateway IP address and set "172.16.3.0/24" as the destination IP address.
Vigor2912 Series User's Guide
176