Draytek Vigor2912 User Manual page 291

Bind Type
Server IP Address
Destination Port
Use SSL
Regular DN
Regular Password
After finished the above settings, click OK button to save the settings.
P r o f i l e s
P r o f i l e s
You can configure eight AD/LDAP profiles. These profiles would be used with User
Management for different purposes in management.
There are three types of bind type supported.
Simple Mode – Just simply do the bind authentication without
any search action.
Anonymous – Perform a search action first with Anonymous
account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous mode.
The different is that, the server will firstly check if you have
the search authority.
For the regular mode, you'll need to type in the Regular DN
and Regular Password.
Enter the IP address of LDAP server.
Type a port number as the destination port for LDAP server.
Check the box to use the port number specified for SSL.
Type this setting if Regular Mode is selected as Bind Type.
Specify a password if Regular Mode is selected as Bind
Type.
281
Vigor2912 Series User's Guide