Call Waiting/Off-Hook Call Announcement (Ohca)/Whisper Ohca - Panasonic KX-TDA50 User Manual

1.7 Extension Settings
• The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Flashing red slowly: FWD mode
Red on: DND mode
• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1)
When in the FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting
as shown below:
(2)
When in the FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status will take you directly
to the programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
• If your extension has set this feature, a calling extension will hear DND tone.
• If this feature is set, the Call Forwarding (FWD) feature does not work.
• Specified extensions can override this feature and call DND extensions (DND Override).
• When intercom calls are set to be handled differently from outside calls (DND set/cancel),
we recommend establishing buttons for both FWD/DND—Outside calls and FWD/DND—
Intercom calls, because:
a)
the light patterns of the FWD/DND—Both calls button (including FWD/DND button
[fixed button]) will indicate the setting for either outside calls or intercoms calls, but not
both.
Note
The DND icon on PS display reflects the setting for outside calls only.
b)
pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button])
will not change the FWD or DND mode for intercom calls and outside calls separately.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.
1.7.3 Call Waiting/Off-hook Call Announcement (OHCA)/
Whisper OHCA
During a conversation, you can be informed of a call waiting with a tone or voice announcement
through your built-in speaker or handset. (Default: Enable—Tone)
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT,
refer to "3.1.2 Settings on the Programming Mode".
OHCA:
a voice announcement through the built-in speaker
78 User Manual
FWD DND Off