Call Park - Panasonic KX-TDA50 User Manual

• For simple operation, you can automatically hold a call by pressing another CO, G-DN
or INTERCOM button, only if preprogrammed. (Automatic Call Hold) Consult your
dealer.

Call Park

You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve
the parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a
Call Park button and Call Park (Automatic Park Zone) button have been established, you can select
either way to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you
need to specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park .
PT/PS
During a conversation
TRANSFER
Press TRANSFER .
SLT
During a conversation
Press Recall/
hookswitch .
parking zone no.
5 2
52 . Enter a specified parking
Enter
zone number (2 digits) or press
to park at an idle parking zone
automatically.
If you hear a busy tone, enter another
parking zone number or press
5 2
52 . Enter a specified parking
Enter
zone number (2 digits).
If you hear a busy tone, enter another
parking zone number.
1.4 During a Conversation
Specified
OR
Auto
again.
parking zone no.
C.Tone
C.Tone
On-hook.
On-hook.
User Manual 53