General Features
Pulse to Tone Conversion
Description
Allows the extension user to change the dialing mode from pulse dial to tone dial (DTMF)
temporarily during a call so that they can access special services which require tone dialing
such as a computer-accessed long distance call.
Conditions
• This feature works only for CO lines set to Pulse Dialing mode.
• Dial Type Selection provides selection of a dial mode for each CO line.
• DISA call
This feature is not available during a DISA call.
• Changing from tone to pulse is not possible.
Programming Guide References
• 4.2 Trunk Line
– Dial Type
Features Guide References
1.3 System Features
• Dial Type Selection
User Manual References
• 4.3.64 Pulse to Tone Conversion
282
Features Guide