Panasonic KX-TD500 Features Manual page 257

• Assignable destination is FDN of Incoming Group or Extension Group.
If "DIL 1:N" is specified in "Group Type" setting of Incoming Group, this feature does not
work.
• Regarding the PT with the Group FWD button, if Incoming Group FWD feature is assigned
to the PT extension, the Group FWD indicator lights in red.
• While setting, you can temporarily cancel this feature by pressing the Group FWD button.
Pressing the Group FWD button alternates between setting and canceling the mode.
The lighting patterns of the Group FWD button are as follows:
Off: This feature is not set.
Red on: Group FWD mode
• The Group FWD button cannot be used to store or cancel this feature.
Please use the feature number for Group FWD instead.
Programming Guide References
• 2.3 Numbering Plan
– Group FWD
• 2.4 Class of Service (COS)
– Incoming Group FWD
• 2.8 System Option
– Special dial tone after setting feature
• 4.3 Extension Line
– CO Key
• 4.4 DSS Console
– DSS Key
Features Guide References
None
User Manual References
• 4.3.10 Call Forwarding — All Calls to an Incoming Group
• 2.2.3 Flexible Button Assignment
• 3.2.5 [005] Flexible CO Button Assignment
Features Guide
General Features
257