Panasonic KX-TD500 Features Manual page 145

"Calls to Empty Group"
are allowed.
See previous page,
"All Busy."
Overflow Destination
is not programmed.
Intercept Destination
is not programmed.
Waiting Queue
Notes
• Overflow destination
One of the following five destinations can be assigned as the Overflow destination per
UCD Group: an extension, other Extension Groups, other Incoming Groups (except DIL
1:N Group), Phantom Extension or TAFAS (outside calls only).
• If the overflow destination or UCD Time Table is not programmed, the call is put in the
waiting queue. Then if not answered within a specified period of time (Intercept time),
the call will be transferred to the IRNA destination.
(4) UCD Time Table
If all extensions in a UCD group are busy, the incoming CO calls will be handled by the UCD
Time Table procedure.
Up to 32 UCD Time Tables, max. 16 steps for each, can be assigned by System Programming.
The following commands are provided to make up a UCD Time Table procedure.
Features Guide
All Logout
"Calls to Empty Group"
Outside calls Intercom calls
Disconnected
Overflow Destination
is programmed.
(Immediately)
Overflow
Destination
Intercept Destination
is programmed.
(Immediately)
Intercept
Destination
are not allowed.
Transferred
intercom calls
Overflow
Destination is
not programmed.
Cannot be transferred
General Features
Transferred
outside calls
Overflow
Destination
is programmed.
(Immediately)
Overflow Overflow
Destination Destination
is not idle. is idle.
Overflow
Destination
145