Holding Features; Automatic Hold-For Hold - Panasonic KX-TD500 Features Manual

1.10 Holding Features

Automatic Hold—For Hold
Description
Allows the PT user engaged in a call (extension or outside) to answer an incoming call
(extension or outside) or to get a new line for making a call without losing the current call with
a simple operation.
If this feature is enabled, the current call will be placed on hold automatically (without pressing
the TRANSFER button) when the PT user presses the CO or DN (on which a call is coming
in) or Answer button; or the PT user presses an idle CO or DN button to get a line for making
a call.
Conditions
• This feature can be enabled/disabled on a system-wide basis by System Programming
<Section 2.8 System Option, "26. Pressing CO/DN/Answer key operation in talking" in the
Programming Guide>.
• If this feature is disabled, pressing another button during the call disconnects it.
• "Automatic Hold—For Hold" [system-wide basis] and "Automatic Hold—For Transfer"
[COS basis] can be enabled/disabled independently.
Programming Guide References
• 2.8 System Option
– Pressing CO / DN / Answer key operation in talking
• 2.4 Class of Service (COS)
– Automatic Hold
Features Guide References
1.10 Holding Features
• Automatic Hold—For Transfer
User Manual References
Not applicable.
Features Guide
General Features
243