Trunk Access - Panasonic KX-TD500 Features Manual

Trunk Access

Description
There are the following four ways to access an idle CO line for making a call.
Type
Idle
Direct
Individual
Trunk
Trunk
Group
Conditions
[General]
• Class of Service (COS) programming
COS programming determines the trunk group available for each extension user <Section
2.4 Class of Service (COS), "Trunk Group Setting" in the Programming Guide>.
• All PTs in the system have one L-CO button by default.
• Flexible CO Button Assignment
A flexible CO button can be assigned as an S-CO, G-CO or L-CO button by Station, User
or System Programming as follows:
Button Type
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Features Guide
Description
Selects an idle CO line automatically from
the trunk groups assigned to the extension.
Selects an idle CO line by pressing an idle
CO button directly.
Select the desired CO line without dialing
the line access number.
Select an idle CO line from the desired trunk
group assigned to the extension.
A specific outside line is assigned.
A trunk group is assigned.
All outside lines are assigned.
Dial the feature number for
"Local CO Line Access / ARS"
(default=9).
Or press a Loop-CO (L-CO)
Button. <PT only>
Press an idle CO (S-CO, G-
CO, L-CO) button. <PT only>
Press a Single-CO (S-CO)
button. <PT only>
Dial the trunk group access
number and a trunk group
number. Or press a Group-CO
(G-CO) button. <PT only>
Assignable parameters
General Features
How to access
195