Line Preference-Incoming (No Line/Prime Line/Ringing Line) - Panasonic KX-TD500 Features Manual

Line Preference—Incoming (No Line/Prime Line/
Ringing Line)
Description
A PT user can select the method used to answer incoming calls from the following three line
preferences:
a)
No Line Preference
No line is selected when an extension user goes off-hook to answer a call. He must press
a desired Line Access button to answer an incoming call.
b)
Prime Line Preference
An extension user can assign a prime line beforehand and answer a call ringing on that
line simply by lifting the handset, even when multiple calls are ringing on his extension
simultaneously.
A Prime Line can be selected from the following line access buttons.
<ICM type PT>
ICM, S-CO, G-CO, L-CO
<DN type PT>
PDN, SDN, S-CO, G-CO, L-CO
c)
Ringing Line Preference (default)
An extension user can answer the call ringing at his extension simply by going off-hook.
Conditions
• Setting a new line preference feature cancels the previous setting.
• If "Prime Line Preference" is selected, an incoming call coming from a line other than the
prime line cannot be answered just by going off-hook. To answer the call, the extension user
must press the flashing button associated with the ringing line.
• Delayed Ringing
If "Ringing Line Preference" is selected, going off-hook does not answer a line
programmed for "no ring" even though there is an incoming call. Going off-hook during the
delay time does not answer a line programmed for "delayed ringing."
• <SLT>
An SLT is fixed to Ringing Line Preference mode.
Programming Guide References
• 4.3 Extension Line
– CO Key
– [Preferred Line] Incoming
Features Guide References
None
Features Guide
General Features
239