System Expansion; Extra Device Port (Xdp) - Panasonic KX-TD500 Features Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD500:
- System reference manual (1574 pages) ,
- User manual (554 pages) ,
- Programming manual (393 pages)
Table of Contents
Advertisement
General Features
1.1 System Expansion
EXtra Device Port (XDP)
Description
A DPT and an SLT can be connected to the same extension port but have different extension
numbers so that they can act as completely different extensions.
Conditions
• Hardware Requirements
DHLC card (KX-TD50170) is required to utilize this feature.
• XDP requires previous programming of the extension port. Enable XDP mode for the
desired port by System Programming.
• If one or more DHLC cards are installed after booting up the System with default values,
DN assignment should be done before performing XDP assignment.
Installation Manual References
• 2.4.13 Extra Device Port (XDP) Connection
Programming Guide References
• 1.4 Extension Port Assignment
– Parallel / XDP (DHLC card)
Features Guide References
1.3 System Features
• Paralleled Telephone
User Manual References
Not applicable.
10
Features Guide
Advertisement
Table of Contents
