Panasonic KX-TD500 Features Manual page 364

ISDN Features
or disable the tenant assigned on a DID No. basis by System Programming <Section 2.8
System Option, "VM Trunk Service for DID " in the Programming Guide>.
• Tenant number is used to determine the time mode (day/night) for the corresponding DID
number. VPS trunk group number is used in DPT Integration.
Installation Manual References
• 2.5.6 BRI Card (KX-TD50288)
• 2.5.7 PRI23 Card (KX-TD50290)
Programming Guide References
• 1.8 BRI Port Assignment
• 1.9 PRI Port Assignment
• 2.8 System Option
– Destination Busy - DID
– Illegal Number - DID
– VM Trunk Service for DID
• 3.2 Trunk Group
– Intercept Destination – Day / Night
• 4.2 Trunk Line
– Incoming Type
– Destination—Day/Night/Lunch/Break
– [DID/TIE] Digits to delete
– [DID/TIE] Number to be added
– Digit to receive DID
• 4.3 Extension Line
– Intercept Destination — Day / Night
• 9.2 DID Dial Registration
– DID/MDN No.
– Tenant No.
– VPS Trunk Group No.
Features Guide References
2.1 ISDN Features
• Integrated Services Digital Network (ISDN)
User Manual References
Not applicable.
364 Features Guide