Figure 6-1. Slot Usage For Two-Cabinet Systems, Dbs 40 + Dbs 40 - Panasonic CPC-EX Installation Manual

Chapter 6. Double-Cabinet Systems

Figure 6-1. Slot usage for two-cabinet systems, DBS 40 + DBS 40

TRK1 EC1 EC2 EC3 EC/TRK
TRK1 EC1 EC2 EC3 EC/TRK
Notes:
*See "T1 Interface" on page 4-11 for EC/TRK port numbers for T1.
A maximum of two MFR cards can be installed in a two-cabinet system. With Cable Kit
#
Version 1.1, one MFR is installed in the Master AUX1, and one MFR is installed in the
Slave AUX1. With Cable Kit Version 1.2, both MFR cards are installed in the slave
cabinet--one in the CPC slot and one in AUX1. (When two MFR cards are used, Strap S3
on the second card must be cut.)
6-4
DBS 40 (Slave)
SCC CPC AUX1 AUX2
DBS 40 (Master)
SCC CPC AUX1 AUX2
DBS Manual - Revised April 2000
Section 300-Installation
DBS-2.3/9.2-300