Chapter 4. Trunks and Lines
4. Use a standard 50-pin cable to connect the extensions from the MDF to
5. If you are installing a DBS 40 system, attach the EMI filter to the
Figure 4-15. EMI filter installation (DBS 40 only)
EM I
Fi l t er
4-40
the appropriate extension connector. (Refer to Tables 4-20 through 4-22
for extension pinouts.)
amphenol cable as shown in Figure 4-15.
DBS Manual - Revised April 2000
Section 300-Installation
3 1/ 2"
DBS-2.3/9.2-300