Figure 6-3. Slot Usage For Two-Cabinet Systems, Dbs 72 + Dbs 72 - Panasonic CPC-EX Installation Manual

Chapter 6. Double-Cabinet Systems

Figure 6-3. Slot usage for two-cabinet systems, DBS 72 + DBS 72

TRK TRK
1 2
TRK TRK
1 2
Notes:
*See "T1 Interface" on page 4-11 for EC/TRK port numbers for T1.
Beginning with CPC-B Version 4, the EC/TRK slot in the slave DBS 72 can be used for
trunks or lines. Prior to CPC-B Version 4, this slot could only be used for lines.
#
A maximum of two MFR cards can be installed in a two-cabinet system. With Cable Kit
Version 1.1, one MFR is installed in the Master AUX1, and one MFR is installed in the
Slave AUX1. With Cable Kit Version 1.2, both MFR cards are installed in the slave cabinet-
-one in the CPC slot and one in AUX1. (When two MFR cards are used, Strap S3 on the
second card must be cut.)
6-6
DBS 72 (Slave)
EC1 EC2 EC3 EC4 EC5 EC6 EC/
DBS 72 (Master)
EC1 EC2 EC3 EC4 EC5 EC6 EC/
DBS Manual - Revised April 2000
Section 300-Installation
SCC CPC AUX
TRK 1
SCC CPC AUX
TRK 1
AUX
2
AUX
2
DBS-2.3/9.2-300