Figure 6-4. Slot Usage For Two-Cabinet Systems, Dbs 96 + Dbs 40 - Panasonic CPC-EX Installation Manual

Section 300-Installation

Figure 6-4. Slot usage for two-cabinet systems, DBS 96 + DBS 40

TRK
1
TRK TRK TRK EC1 EC2 EC3 EC4 EC5 EC6 EC7 EC8 EC/
1 2 3
Notes:
*See "T1 Interface" on page 4-11 for EC/TRK port numbers for T1.
#
A maximum of two MFR cards can be installed in a two-cabinet system. With Cable Kit
Version 1.1, one MFR is installed in the Master AUX1, and one MFR is installed in the
Slave AUX1. With Cable Kit Version 1.2, both MFR cards are installed in the slave cabinet-
-one in the CPC slot and one in AUX1. (When two MFR cards are used, Strap S3 on the
second card must be cut.)
DBS-2.3/9.2-300
DBS 40 (Slave)
EC1 EC2 EC3 EC/
TRK
DBS 96 (Master)
DBS Manual - Revised April 2000
Chapter 6. Double-Cabinet Systems
SCC CPC AUX AUX
1 2
SCC CPC AUX
TRK
AUX
1 2
6-7