Remote Control; Installing The Batteries - Christie LWU701i Operating Manual

Remote control

Remote control

Installing the batteries

Insert the batteries into the remote control before using it. If the remote control
starts to malfunction, replace the batteries. If not using the remote control for long
period, remove the batteries from the remote control and store them in a safe
place.
1.
Holding the hook part of the battery
cover, remove it.
2.
Align and insert the two AA batteries
according to their plus and minus terminals
as indicated in the remote control. (Use
the appropriate AA carbon-zinc or alkaline
batteries (non-rechargeable) according
to laws and regulations. Batteries not
included.)
3.
Replace the battery cover in the direction of the arrow
and snap it back into place.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage, which
could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different types at
the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
►Always handle the batteries with care and use them only as
28
1
2
020-000786-02
LIT MAN USR D2
3