Maintenance; Replacing The Lamp - Christie LWU701i Operating Manual

Maintenance

Maintenance

Replacing the lamp

A lamp has finite product life. Using the lamp for long periods of time could cause the
pictures darker or the color tone poor. Each lamp has a different lifetime, and some
may burst or burn out soon after you start using them.
New lamp preparation and early replacement are recommended. To prepare a new
lamp, contact your dealer and indicate the lamp type number.
Type number : 003-005336-01 (DT01885) <LWU701i/LW751i/LX801i>
Replacing the lamp
1.
Turn the projector off, and unplug the power cord. Allow
the projector to cool for at least 45 minutes.
2.
Prepare a new lamp. If the projector is mounted with
specified mounting accessories, or if the lamp has broken,
also ask the dealer to replace the lamp.
In case of replacement by yourself, follow the following
procedure.
3.
Loosen the screw (marked by arrow) of the lamp cover and then
slide down and lift the lamp cover to remove it.
4.
Loosen the three screws (marked by arrow) of the
lamp, and slowly pull the lamp out by the handles.
Never loosen any other screws.
5.
Insert the new lamp, and firmly retighten the three
screws of the lamp loosened in the previous step to
lock it in place.
6.
While putting the interlocking parts of the lamp cover and
the projector together, slide the lamp cover back in place.
Then firmly fasten the screw of the lamp cover.
7.
Turn the projector on and reset the lamp time using the LAMP
HOURS item in the SETUP menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the ▼/▲
button, then press the ► button.
(3) Point at the SETUP in the left column of the menu using the
▼/▲button, then press the ► button.
(4) Point at the LAMP HOURS using the ▼/▲ button, then press the ► button. A dialog appears.
(5) Press the ► button to select "OK" on the dialog. It performs resetting the lamp time.
CAUTION
removed.
NOTE
• Reset the lamp time only when you have replaced the lamp, for a
suitable indication about the lamp.
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
003-005337-01 (DT01875) <LWU601i/LW651i>
►Do not touch the interior of the projector, while the lamp is
108
3
Lamp cover
Handles
4, 5
020-000786-02
LIT MAN USR D2
6