Christie LWU701i Operating Manual page 86

Item
SOURCE NAME
(continued)
TEMPLATE
(continued on next page)
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
(6) The current name is displayed on the
first line. Use the ▲/▼/◄/► buttons and
the ENTER or INPUT button to select
and enter characters. To erase one
character at a time, press the RESET
button or press the ◄ and INPUT button
simultaneously. Also if you move the
cursor to DELETE or CLEAR ALL on
screen and press the ENTER or INPUT
button, one or all characters are erased.
The name can be a maximum of 16
characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is
selected. Then, follow the same procedure as described at the
item (6) above.
(8) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or INPUT button.
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed (89).
TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3

STACK ó MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, display
the guidance by pressing the RESET button on the remote three
seconds or more when MAP1 or MAP2 appears.
Description
85
MENU PREFERENCES

020-000786-02
LIT MAN USR D2