Christie LWU701i Operating Manual page 35

Status Monitor
Displaying the log (continued)
NOTE
• The Status Monitor and its backlight returns to the first state before
the FUNCTION or ENTER button was pressed when any button except cursor
buttons is pressed, or after about 30 seconds without button operation.
• The projector usage time is the total lamp time from the projector is
manufactured. It is not reset by using LAMP HOURS in the SETUP menu (75).
• If the ▲/▼ buttons are pressed while the usage time is displayed, the usage
time switches to the past one when an error occurred.
 To display error history
Press the ▲ button to display the previous
error log. If a warning has been displayed,
the first previous error log is the present
error currently occurring. The Status Monitor
displays the log number, occurred error, the
supplied voltage and peripheral temperature
at that time. Press the ► button to display the
usage time when each error occurred.
Use the ▲/▼ buttons to switch the log.
The display switches with the ◄/►
buttons at each log. Up to 10 error
logs including the present one can be
displayed.
NOTE
• The Status Monitor and its backlight returns to the first state before
the FUNCTION or ENTER button was pressed when any button except cursor
buttons is pressed, or after about 30 seconds without button operation.
• If no error or less than 10 errors have occurred, "NO DATA" is displayed
regardless of what error occurred in the error log.
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
Log number
P R E V I O U S
1
7 F I L T E R E R R O
A C 2 4 0 V
Error log (example)
Error log1
First display
Error log10
34
Error
3 5 ° C
Usage time
(error log1)
Usage time
(current)
Usage time
(error log10)
020-000786-02
LIT MAN USR D2