Christie LWU701i Operating Manual page 20

Connecting with your devices (continued)
About HDBaseT™ connection
• HDBaseT is a technology to transmit image, sound, ethernet or serial control
signal using a LAN cable.
• Go to the following URL regarding the device of other company that supports
HDBaseT and has been confirmed compatible with this projector.
LAN or HDBaseT input port can be selected as ethernet signal input by
switching in the menu.
• Use LAN cables of up to 100m long. Exceeding this length, the image
and sounds are deteriorated, and even experience malfunction on LAN
transmission.
NOTE • The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players or the like.
- The HDMI ports support the following signals:
For Video signals, refer to User's Manual (detailed) Technical.
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Qualified cable is required for HDBaseT connection.
- Use an HDMI
TM
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
• The HDMI cables might come off due to the lack of a mechanical lock on
TM
the cables and connectors. Fasten the HDMI cables by using the HDMI cable
holder and the Cable tie to prevent them from coming off (23).
(continued on next page)
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
http://www.christiedigital.com
cable that has the HDMI
cable to connect with the HDMI
logo.
TM
cable to input 1080p@50/60 signal to the
TM
input.
TM
19
Setting up
TM
020-000786-02
LIT MAN USR D2