Using The Lcd Configuration Menu - Vertical Edge 5000 Installation/Configuration Instructions

Chapter 3

Using the LCD Configuration Menu

This chapter provides detailed information to configure the IP5000 phones using the LCD
Configuration Menu. The LCD displays the configuration menu and softkey functions. The
softkeys and dial pad select menu items and input values. A configuration session begins by
pressing the Settings (
below. Select the desired menu item using one of the following methods:
• Use the dial pad to input the menu item number.This is the digit displayed in front of
the item,
OR
• Navigate with the [Next]-[Previous] softkeys to highlight the item and select with the
[OK] softkey.
When the desired parameter is reached, enter data with the dial pad or select values with the
softkeys. Refer to the "LCD Configuration Menu" below for the complete menu.
The first three sections: "Navigating the Menu", "Entering Values", and "Lock/Unlock
Configuration" give general information on use of the LCD Menu. The remaining paragraphs
of this section give descriptive and procedural information for each parameter of the menu.
Information is organized to follow the structure of the menu as shown in the "LCD Configuration
Menu" below.
Release 1.0
) button, which accesses the LCD Configuration Menu shown
Configuration Menu
1.Network Configuration
2.SIP Configuration
3.Phone Settings
4.Call Preferences
5.Directory
6.Set to Default
7.Lock/Unlock Config
8.Information
9.Reboot
LCD Configuration Main Menu
Edge 5000 Installation / Configuration Guide
September 2010