Using The Couplers; Removing The Packing Material From The Double Door Boxcar - Lionel Canadian Pacific Freight Owner's Manual

Operating and servicing your train set

Using the couplers

E ach car features magnetic couplers. To operate the couplers by hand, slide the uncoupling
tab on the side of the coupler arm toward the car. Do not push down on the tab. To oper-
ate the couplers with a Remote-Control Track section (available separately, 6-65530 for
O gauge; 6-65149 or 6-12746 for O-27 gauge; and 6-12020 or 6-12054 for FasTrack layouts),
simply position the uncoupling trigger over the magnetic disc on the track and press
UNCOUPLE on the controller. Refer to Figure 9 for the locations of the uncoupling tab and
uncoupling trigger.
Underside of truck shown
Uncoupling tab
Figure 9. Uncoupling tab and trigger locations

Removing the packing material from the double door boxcar

T
wo stacks of cardboard have been placed on top of the auto frames inside the car. The card-
board secures the auto frames during shipping. When you are ready to operate the car,
simply slide the cardboard out through the doors.
32
Uncoupling trigger