Tuning Your Locomotive's Performance - Lionel Canadian Pacific Freight Owner's Manual

TrainMaster Command Control operations
Tuning your locomotive's performance (continued)
Setting the minimum speed
You may use your CAB-1 Remote Controller to set your locomotive's minimum, or stall,
speed.
1. With the Command reverse unit switch in the RUN position, address your locomotive by
pressing ENG and entering the ID#.
2. Press SET on the CAB-1 Remote Controller. The headlight will flash.
3. Get your locomotive moving at your desired minimum speed.
4. Press SET again. The locomotive will stop.
The next time you throttle up, your locomotive will start at the speed you set. To clear this
setting, press SET twice, holding the button for one second each time.
23