Interrupting A Programme; Changing A Programme - Miele PG 8052 Operating Instructions Manual

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely ne-
cessary and exercise extreme cauti-
on when doing so. Before closing
the door again, leave it ajar for ap-
prox. 20 seconds. This will enable
the temperature in the wash cabinet
to settle. Then close the door firmly
making sure that it clicks into place.

Changing a programme

Important:
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as fol-
lows:
^ Press the Start/Stop button h/f for
at least one second.
The programme will be cancelled.
The Start/Stop indicator light h/f will
flash.
^ Then use the programme selector
buttons %$ to select a different
programme.
The indicator light next to the program-
me selected will come on.
^ Select the "Drying" and "Delay start"
additional functions again if wished
(see "Additional functions").
^ Press the Start/Stop button h/f.
The programme will begin.
Operation
37