Other Speaker Setup Options - Panasonic SC-HT1000 Operation Manual

Other speaker setup options

Attaching to a wall
1
Drive a screw (not supplied) into the wall.
30–35 mm
‰7.5–9.4 mm
8–11 mm
Wall or pillar
≥Two screws are needed per speaker when attaching the front
and center speakers to the wall.
Front speakers
Vertical
230 mm
Note
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw.
Consult a qualified building contractor when attaching the speakers to
wall. Improper attachment may result in damage to the wall and
speakers.
≥When mounting the front speaker to a wall, we recommend using a
string (not supplied) to prevent it from a fall (
≥Use of optional speaker cables are recommended for wall mounted
front speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
Fitting speaker stands (not supplied)
Preparation
≥Ensure the stands meet these conditions before purchasing them.
– Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
– The stands must be able to support over 10 kg.
– The stands must be stable even if the speakers are in a high
position.
18
2
Front speakers
Center speaker
Horizontal
For your reference
150 mm
page 11).
e.g., Surround speaker
Attach the stands
with these holes.
≥You can also attach to the center speaker in the same way.
Fit the speaker securely onto the
screw(s) with the hole(s).
Center speaker
In this position, the speaker will likely fall if moved to
the left or right.
Move the speaker so the screw is in this position.
5 mm, pitch 0.8 mm
60 mm
Speaker stand
(not supplied)
Plate thickness plus 7 to 10 mm
Surround speakers