≥Switch [HOME THEATER, TV] to "HOME THEATER".
≥Press [FM/AM] to select "FM" or "AM" as the source.
Press [X TUNING] or [TUNING W] on
the main unit to select the frequency
of the required station.
Remote control: Press  or .
TUNED: Displayed when a radio station is
Displayed when a stereo FM
broadcast is being received.
Press and hold [X TUNING] or [TUNING W] ( or 
on the remote control) until the frequency starts scrolling to
start automatic tuning. Tuning stops when a station is found.
Adjust the volume.
∫ If noise is excessive
Press [FM MODE].
Each time you press the button:
FM: Changes between stereo and forced monaural.
AM: BP1()BP2 (BPlBeat Proof)
Select either BP1 or BP2, whichever receives better reception.
The FM mode is canceled when you change the frequency.
VIDEO Plus +
DIRECT TV REC
W X CH
r s VOLUME
S W. LEVEL
X TUNING W
MEMORY FM MODE
VOLUME DOWN, UP
Preset channels to make selection simple.
Up to 12 stations can each be set in the FM and AM bands.
Tune to "FM 87.50" MHz ( left).
Press and hold [MEMORY].
Release the button when "AUTO" is displayed.
The tuner presets all the stations it can receive into the
channels in ascending order.
"SET OK" is displayed when the stations are set. The last
station to be set is then played.
Tune to "AM 522" kHz.
Repeat step 2 for AM automatic presetting.
"ERROR" is displayed
Presetting was unsuccessful. Preset manually.
Tune to the station ( left).
While "MEMO" is flashing
Press [X, W CHANNEL] to select a
channel and press [MEMORY].
The station occupying a channel is erased if another station is preset
in that channel.
Press [FM/AM] to select "FM" or
Press the numbered buttons or
[W X CH] to select the channel.
If there is nearby electrical interference during auto tuning the
frequency may come to a halt without locating a channel. Turn off the
power of the nearby electrical equipment.