Other Speaker Setup Options - Panasonic SC-HT930 Operating Instructions Manual

∫ Preventing the speakers from falling over
Preparation
Attach screw eyes (not included) to secure the speakers to the wall
(➜ diagram right).
≥You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may
not have strong enough support. Improper attachment may result in
damage to the wall or speakers.
1
Thread the string (not included) through the slot on the rear
of the speaker to prevent it from falling over.
2
Loop the string through the screw eye and tie tightly.

Other speaker setup options

∫ Attaching to a wall
You can attach all of the speakers to a wall.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg per screw. Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to the wall and speakers.
(Front and surround speakers)
≥When mounting the front or surround speakers to a wall, we recommend using a string
(not included) to prevent it from falling (➜ above).
≥Use of optional speaker cables is recommended for wall-mounted front or surround speakers.
(You can also remove the speaker cables from the pipes supplied with this system).
Center speaker
180 mm
In this position, the speaker
will likely fall if moved to the
left or right.
∫ Fitting speaker stands
(Center speaker only)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high
position.
Move the speaker so that
the screw is in this position.
(not included)
Screw eye (not included)
String (not included)
Rear of the speaker
‰3.0–4.0 mm
Wall or pillar
Front and surround speakers
366 mm
Center speaker
Attach the stands
to these metal
screw holes.
5 mm, pitch 0.8 mm
Plate thickness plus
7 mm to 10 mm
60 mm
Wall
Approx. 150 mm
30–35 mm
‰7.5–9.4 mm
4.0–7.0 mm
175 mm
Speaker stand
(not included)
RQT7985
5