Other Speaker Setup Options - Panasonic SC-HT335 Operating Instructions Manual

Other speaker setup options

∫ Attaching to a wall
You can attach all of the speakers to a wall.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Front and surround speakers
In this position, the
speaker will likely
fall if moved to the
left or right.
∫ Fitting speaker stands
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.
e.g. Front and surround speakers
Attach the stands to these
metal screw holes.
RQT8291
26
Move the speaker
so that the screw is
in this position.
(not included)
5 mm, pitch 0.8 mm
60 mm
Speaker stand
(not included)
Plate thickness plus 7 mm to 10 mm
30–35 mm
‰3.0–4.0 mm
4.0–7.0 mm
Wall or pillar
Center speaker
‰7.5–9.4 mm
90 mm