Recording Television Programmes; Inserting Discs - Panasonic SC-HT1000 Operation Manual

Recording television programmes

1
DISPLAY
DIRECT
TV REC
1
Numbered
4
buttons
7
CANCEL
SKIP
STOP
∫
;
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
FUNCTIONS
AV2/OPT
FRAME
PROG/CHECK
STATUS
STATUS
A
SHIFT SHIFT
1 4 5 6
REC
CHANNEL
DVD FM/AM REC MODE ERASE
2

Inserting discs

You can insert a cartridge or non-cartridge disc.
Non-cartridge disc
Insert label-up.
Insert label-up with the arrow facing in.
≥Load double-sided discs so the label for the side you want to
record/play is facing up.
≥When using 8 cm DVD-RAM, remove the disc from the cartridge
and insert it, making sure you align it with the groove.
≥It is not possible to record/play continuously from one side of
a double sided disc to the other. You will need to eject the disc
and turn it over.
Should the AC mains lead come loose by accident or
for any other reason the power supply is cut off while
recording or editing is taking place, the contents of
the disc may be lost.
24
HOME THEATER TV HOME THEATER,
TV
VIDEO Plus +
DVD FM/AM
2
DIRECT TV REC INPUT SELECT AV
AV
2 3
4
CH
6
5
VOLUME
8 9
0 -/--
SLOW/SEARCH
PAUSE PLAY/x1.3
PLAY LIST
MENU
ENTER
CH SELECT
RETURN
MIX
2CH TEST PRO LOGIC
MANUAL SKIP TIME SLIP
6
TIMER ERASE REC
F
5
MULTI REAR S.POSITION C.FOCUS
MARKER F.Rec REC MODE
B C D
P.MEMORY AUDIO
F.Rec
EQ/SFC S W. LEVEL MUTING
3 3
VOLUME
OPEN/CLOSE
TIMER REC EXT. LINK
MEMORY FM MODE
RDS
TIME SLIP
TIME SLIP
DOWN
∫
Insert inside the
tray's guides.
Cartridge disc
[RAM] [DVD-R]
Preparation
≥Release protection when you record. [RAM]
(Cartridge
≥Switch [HOME THEATER, TV] to "HOME THEATER".
1
Press [Í] to turn the unit on.
2
Press [DVD] to select "DVD/CD" as the
source.
3
Press [< OPEN/CLOSE] on the main
unit to open the tray and insert a disc
( left).
Press the button again to close the tray.
4
Press [W X CH] to select the channel.
To select with the numbered buttons:
e.g. "5": [5] , "15":[-/--]
5
Press [REC MODE] to select the
recording mode ( page 25).
To record sound using LPCM (XP mode only):
From the SETUP menu, set the "Audio Mode for XP
Recording" setting to "LPCM" (the picture quality may go
down slightly). ( page 53)
6
Press [¥ REC] to
start recording.
≥Recording will be made on blank/open space on disc. Data
will not be overwritten.
≥Programme information (e.g., time and date) is registered in
the programme list ( page 32, Using the Direct Navigator).
≥This function is not available if the signal source comes from
TUNING
digital satellite or digital terrestrial receiver.
UP
PHONES
[DVD-R]
To play DVD-R on compatible equipment, finalize it ( page 47).
To stop recording
Press [∫].
To pause recording
Press [;]. Press again to restart recording.
(Programme is not split into a separate programme.)
[Note]
≥You cannot change the channel or recording mode during
recording.
≥When using a DVD-RAM for the first time with this unit, format it to
ensure accurate recording ( page 47).
≥There are limitations when recording to DVD-R ( page 8).
≥It is not possible to record CPRM ( page 66) protected material
onto DVD-R or 2.8 GB DVD-RAM discs.
≥When recording a bilingual TV broadcast onto DVD-R or recording
using LPCM, only one of either the main channel or the sub
channel can be recorded. Select from "Bilingual Audio Selection"
( page 53).
≥Recording cannot be performed correctly if you try to record a PAL
system recording to a disc that already contains recordings using
NTSC, and vice versa.
For your reference
≥You can record up to 99 programmes on one disc.
≥In RGB recording, set "AV2 Input" to "RGB (PAL only)".
( page 53)
page 8, disc page 46)
[1] [5]
REC
-
DVD RAM XP
PG