Table of Contents
Advertisement
∫ Preventing the front and surround speakers from falling over
Preparation
≥You will need to obtain the appropriate screw eyes to match the
walls to which the screw eyes are going to be fastened.
≥The walls should be capable of supporting 30 kg per screw.
[Note]
Consult with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in damage to the wall or speakers.
Other speaker setup options
[HT888]
(Center speaker only)
∫ Attaching to a wall
1 Drive a screw (not included) into a wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg per screw. Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to the wall and speakers.
e.g. Center speaker [HT888]
[HT623]
[HT623]
200 mm
String (not included)
Wall
Approx. 150 mm
Screw eye (not included)
Wall or pillar
RQTC0047
5
Hide quick links:
Advertisement
Table of Contents
