Panasonic SC-HT1000 Operation Manual page 53

Tabs
PLAY t1.3 & Audio during Search
Sound
[RAM] [DVD-R] [DVD-A] [DVD-V]
Choose whether to operate the Quick View (Play k1.3) or not
and whether to have sound during the first level of fast-
forward.
≥You may hear sound regardless of this setting with some
discs. [DVD-A]
Dynamic Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Bilingual Audio Selection
Select whether to record the main or secondary audio type
when recording to DVD-R or when recording using LPCM
sound ("Audio Mode for XP Recording"
Audio Mode for XP Recording
Choose the audio type when recording with XP mode.
≥Sound recordings made using LPCM require more
information than usual. Consequently the picture quality of
LPCM recordings may be less than that of normal XP mode
recordings.
Speaker ( page 58)
Set the delay time for your center and surround speakers.
Display On-Screen Messages
Choose whether to show on-screen messages automatically.
Grey Background
Channel Guide
FL Display
Changes the brightness of the unit's display and the volume
dial LED goes on or off.
Connection TV Aspect ( page 22)
TV System ( page 58)
Norm (4:3) TV Settings (DVD-Video)
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
Norm (4:3) TV Settings (DVD-RAM)
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.
AV1/AV2 Settings
If you connect an other equipment with
RGB output capability to the AV2
terminal on this unit, the output signal of
the equipment must be set to RGB when
you have set "AV2 Input" to "RGB (PAL
only)".
Menus
[VCD]
below).
AV1 Output
AV2 Input
AV2 Connection
This setting is fixed
with "NORMAL" if
you set "TV
System" to "NTSC".
Options
≥On
≥Off: Quick View ( page 34) does not work.
≥On ≥Off
≥M1 ≥M2
You cannot change secondary audio when recording audio to
DVD-R from an external source.
≥Dolby Digital ( page 66)
Multi Channel
Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
Surround (L/R): 0.0/5.0/10.0/15.0 ms
≥Automatic ≥Off
≥On
≥Off: When you do not want to have the unit show the grey
background when reception is weak.
≥On: The Channel Guide will appear for a few seconds each time
the channel is changed with [W X CH].
≥Off: The Channel Guide will not appear.
≥Bright ≥Dim
≥Norm (4:3)
≥PAL
≥Pan & Scan ( page 66):
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox ( page 66):
Video recorded for a widescreen is played in the letterbox style.
≥Norm (4:3): Programmes played as recorded.
≥Pan & Scan: Video recorded for a widescreen is played as Pan &
Scan.
≥Letterbox:
Video recorded for a widescreen is played in the
letterbox style.
≥Video ≥S-Video
≥Video ≥S-Video
≥NORMAL: When the VCR or a satellite receiver is connected.
≥DECODER:When a decoder is connected.
≥Ext Link 1: When a digital receiver which transmits a special
control signal recordings via the 21-pin Scart cable,
for example when a F.U.N. receiver (TU-DSF30/S3)
is connected for the linked timer recordings.
≥Ext Link 2: When external equipment with a timer function is
connected for the linked timer recordings.
≥LPCM ( page 66)
≥Wide (16:9)
≥NTSC
≥RGB ( page 66)
≥RGB (PAL only)
53