Edit - Panasonic SC-HT1000 Operation Manual

Edit

5
Press [2, 1] to select the item (Add, Move, Re-edit or Erase) and press [ENTER].
1 10/10 0:03 004 Dinosaur
PLAY LIST
Edit
Add Move Re-edit Erase
003
001 00:00.19 002
SELECT PAGE
004 - - -
- - -
0 ~ 9
SELECT
- - - - - - - - -
ENTER
Back 001 / 001 Next
RETURN
Add (maximum of 999 scenes)
6
Press [3, 4, 2, 1] to select the place
where you want to add the scene and
press [ENTER].
7
Press [ENTER] at the start point of the
scene.
PLAY LIST No.3 Dinosaur
PLAY LIST
Add
Scene No.
01 PLAY
Start
End
Next
Exit
3 0 : 00 . 05
SELECT
Start
ENTER
RETURN
--:--.--
0 : 00 . 05
8
Press [ENTER] at the end point of the
scene.
To add other scenes
Press [3, 4] to select "Next" and press [ENTER], then repeat steps
7–8.
9
Press [3, 4] to select "Exit" and
press [ENTER].
The new scene is inserted before the highlighted scene.
Move
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [3, 4, 2, 1] to select the place
where you want to move the scene to
and press [ENTER].
The scene is moved and inserted before the highlighted
scene.
To move other scenes
Repeat steps 6 and 7.
[Note]
≥You can use basic functions like search and slow-motion ( page 31).
≥You can use the skip function to jump to another programme ( page 31).
≥You cannot specify an end point before a start point.
≥You may not be able to specify points within 3 seconds of each other.
≥Play pauses if the end of the last programme is reached during this procedure.
≥Depending on the state of recording, the actual number of play lists or scenes that can be recorded may be less than that specified in this
manual.
≥You cannot edit still picture images.
To show scene 10 and later
Press [3, 4, 2, 1] to select "Next" and press [ENTER].
You can also select a page of scenes with the numbered buttons.
e.g., "5": [0] [0]
"15": [0] [1]
5
End
[5]
[5]
Re-edit
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [ENTER] at the start point of the
scene.
PLAY LIST No.3 Dinosaur
PLAY LIST
Re-edit
01
3 3
SELECT
Start
ENTER
RETURN
0 : 00 . 05
8
Press [ENTER] at the end point of the
scene.
To re-edit other scenes
Press [3, 4] to select "Back" or "Next" and press [ENTER], then
repeat steps 7–8.
9
Press [3, 4] to select "Exit" and
press [ENTER].
The re-edited scene replaces the old one.
Erase
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [2] to select "Yes" and press
[ENTER].
The selected scene is erased from the play list.
To erase other scenes
Repeat steps 6 and 7.
[Note]
The play list itself is erased if you erase all the scenes in it.
Scene No.
PLAY
1
Back
Start
End
Next
Exit
0 : 02 . 08
End
0 : 02 . 08
43