Selecting The Ldap Server Used By Default - Konica Minolta bizhub c200 User Manual

Specifying network settings
6
Type in the length of time until the LDAP search times out, and then touch [OK].
– The length of time can be set between 5 and 300 seconds.
7
After the desired settings have been specified, touch [Check Connect.].
Check that a connection could be established correctly, and then touch [OK].
Note
If a connection failed to be established, check the settings and the network connections.
To delete the registered settings, touch [Initial]. When the confirmation message appears, touch [OK]
to delete the registered settings.

Selecting the LDAP server used by default

1
In the LDAP Settings screen, touch [Search Default Setting].
– Select a setting for "Search Default Setting" if multiple LDAP servers have been registered.
2
Select the LDAP server to be used as the default, and then touch [OK].
3
Touch [OK] in each screen until the initial screen appears.
C200
1
1-31