Konica Minolta bizhub c200 User Manual page 45

Specifying network settings
4
Touch [IP Relay Address].
5
Type in the address of the IP relay station, and then touch [OK].
– To specify a host name, touch [Host Name], and then type in the host name for the IP relay station.
– To change the port number, touch [Port], and then use the keypad to type in the desired port
number.
– [Host Name] appears only when "DNS Settings" is set to "YES".
6
Touch [Domain Name].
– Specify the domain name when limiting reception according to the domain name during IP relay
operations.
7
Type in the domain name of the IP relay station, and then touch [OK].
8
Touch [OK], and then touch [OK] in the next screen that appears.
9
Touch [Relay Result Port].
C200
1
1-34